Skip to content

Same-day dispatch before 4pm Mon–Fri · Free UK delivery over £5 · 30-day returns

Cracked Phone Back Glass: Is It Safe and How Is It Replaced?

A phone with cracked back glass is usually safe to keep using for a short time, as long as you cover the crack straight away, keep the phone dry and watch for the back lifting or bulging, which can signal a swelling battery. The repair depends on the phone. On many Android phones and some newer iPhones the back glass is a separate part that can be heated off and replaced. On many other iPhones it is bonded to the frame, so repairers use a laser machine or replace the whole rear housing. This guide explains the safety risks, what to do immediately, how each type of repair works, what drives the cost and when DIY makes sense.

Is it safe to use a phone with cracked back glass?

Usually yes, briefly, with precautions. The risks are:

  • Cuts: cracked glass can splinter, especially at the edges and around the camera.
  • Water and dust: any crack breaks the phone's water resistance. Spills, rain and steam can now get inside.
  • Spreading cracks: pressure in a pocket or another drop makes cracks spread, and loose shards can fall out.
  • Camera damage: glass fragments near the camera bump can scratch lens covers or let dust in.
  • Wireless charging heat: wireless charging usually still works, but stop using it if the phone becomes unusually hot.

When to stop using the phone

If the back is lifting, bulging or separating from the frame rather than simply cracked, the battery may be swelling. Stop charging and using the phone, keep it away from anything flammable, and get it inspected promptly. A swollen lithium-ion battery is a fire risk.

What to do straight away

  1. Cover the crack. Clear packing tape or a strip of screen protector film holds fragments in place.
  2. Put it in a case. A case protects your hand and stops further damage.
  3. Keep it dry. Avoid bathrooms, rain and spills until it is repaired.
  4. Back up your phone in case a repair goes wrong or the damage gets worse.
  5. Test the camera, flash, wireless charging and microphones to see whether anything else was damaged.
  6. Check your cover: AppleCare+, Samsung Care+, a phone insurance policy or a contract insurance add-on may cover accidental damage.

How back glass is replaced

There are three main methods. Which one applies depends on your phone's design.

Method How it works Typical phones Notes
Heat and replace the panel Heat softens the adhesive, the old panel is lifted off, the frame cleaned and a new panel glued on Most Android phones, including Samsung Galaxy models; some newer iPhones with redesigned removable backs The most approachable for DIY
Laser removal A laser machine breaks down the adhesive and glass bonded to the frame; residue is scraped off and new glass fitted Many iPhones from the iPhone 8 to the iPhone 13 range and the iPhone 14 Pro models A professional job needing specialist equipment
Rear housing replacement All internal parts are moved into a new frame with back glass already fitted Bonded-glass iPhones, or phones with a bent frame More labour, but a factory-fresh frame

iPhones

From the iPhone 8 onwards, iPhones have had glass backs. On many models the glass is bonded firmly to the frame, which is why repair shops use laser machines or housing swaps. Apple redesigned the internals of the iPhone 14 and 14 Plus so the back glass could be replaced on its own, and has used replaceable back glass designs on several later models. Check the repair options for your exact model with Apple, using its iPhone service and repair page, or ask a repair shop.

Android phones

On most Android phones, including Samsung, Google Pixel, Xiaomi (such as the Redmi K20 Pro) and OnePlus models, the back panel is glued on with adhesive and can be removed with heat. That makes it one of the more approachable phone repairs. Some budget phones use plastic backs, which are even easier and less likely to shatter during removal.

What affects the cost of back glass repair?

We have not quoted repair prices because they vary by model, method and shop, and we have no verified current figures. The main factors are:

  • Phone model: flagship and recent models have more expensive parts.
  • Method: a simple panel swap costs less than laser removal or a housing swap.
  • Who does it: manufacturer repairs often cost more than independent shops unless you have an accidental damage plan.
  • Extra damage: a cracked camera lens cover, damaged wireless charging coil or bent frame adds cost.
  • Part quality and colour match: better panels cost more but fit and look better.

AppleCare+ and broken back glass

If your iPhone has AppleCare+, accidental damage repairs, including back glass damage, are covered for a fixed excess. That is often the cheapest route for an iPhone with bonded glass. Check your coverage in Settings > General > About, and see Apple's AppleCare for iPhone page for current terms. Without AppleCare+, get Apple's estimate and at least one independent quote.

Can you fix cracked back glass yourself?

On phones with a glued, removable back panel, yes, if you are patient and careful. On bonded-glass iPhones, DIY is not practical without a laser machine.

DIY back glass replacement on a glued panel (overview)

  1. Power off and remove the SIM tray.
  2. Tape over the cracks so the glass lifts in bigger pieces.
  3. Heat the edges evenly with a heat gun on low, heat pad or hair dryer.
  4. Lift a corner with a suction cup and work thin plastic picks around the edge, reheating as needed.
  5. Keep picks shallow: the wireless charging coil, NFC antenna and flex cables often sit just underneath.
  6. Clean the frame fully of adhesive and glass with isopropyl alcohol and a plastic scraper.
  7. Fit the new panel with fresh adhesive, aligning the camera cut-out carefully.
  8. Clamp gently while the adhesive sets, then test the camera, flash and wireless charging.

Wear eye protection and gloves; shattered back glass produces sharp splinters. iFixit's phone repair guides include model-specific instructions for many devices.

Tools you need

  • Heat source.
  • Suction cup, opening picks and a plastic spudger.
  • Isopropyl alcohol (90% or higher).
  • Replacement back panel and adhesive.
  • Clear tape, gloves and eye protection.

You can find opening tools, adhesives and heat tools in our repair tools and adhesives collection.

For repair shops: laser back glass machines

Repair shops that handle many iPhone back glass jobs often invest in a laser back glass removal machine. It speeds up bonded-glass repairs and avoids moving all the internal parts into a new housing. Key points when choosing one:

  • Check which models it supports and how model profiles are updated.
  • Consider fume extraction; lasering glass and adhesive produces fumes.
  • Train staff on safety, including eye protection appropriate to the laser.
  • Protect cameras, batteries and coils during lasering.

Our guide to phone screen fixers covers related equipment used in repair shops.

Choosing a replacement back panel

  • Match the exact model. Panels for similar phones (for example a standard and Plus model) differ in size and camera cut-out.
  • Match the colour and finish. Glossy, matte and frosted finishes look different side by side with the frame.
  • Check the camera lens cover. Some panels include it; others need the old one transferred or a new one fitted.
  • Check adhesive is included or buy it separately for your model.
  • Check for a big camera hole on iPhone panels. Panels made for laser-removal repairs often have a larger opening around the camera bump; this is normal.

Questions to ask a repair shop

  1. Which method will you use: panel swap, laser removal or housing replacement?
  2. Will the colour and finish match my frame?
  3. How do you protect the cameras, battery and wireless charging coil?
  4. What warranty covers the glass lifting or wireless charging failing later?
  5. Will any parts tracked by the phone's software be replaced?

Preventing it happening again

  • Use a case with a raised lip around the camera.
  • Consider a back protector film or glass if you use the phone without a case.
  • Avoid back pockets, where sitting puts pressure on the glass.
  • Do not place the phone face up on hard, gritty surfaces, which scratch and stress the back.

Common mistakes

  • Ignoring the crack until water gets in or the camera is scratched.
  • Prying deep under the panel and tearing the wireless charging coil or a flex cable.
  • Not cleaning old adhesive, so the new back does not sit flat.
  • Charging a phone whose back is bulging. Stop and get it checked.
  • Assuming water resistance is restored after a repair. It cannot be relied on.

If the screen broke too

A hard drop often damages the front as well as the back. If your screen is also cracked or shows lines or black areas, a display replacement may be needed as well. On many budget Android phones, the screen is supplied as a full assembly with the frame, which also gives you a new frame. For example, we stock a display assembly for the Infinix Hot 9 Play (X680):

OEM LCD Screen For infinix Hot 9 Play X680 Digitizer Full Assembly with FrameBuy now – £21.59

That price was checked on 15 October 2026. For screen protection after a repair, see our article on glass vs plastic screen guards.

Back glass and housings from The Repair Plus

The Repair Plus supplies parts, tools and machines to repair shops and DIY repairers across the UK. Browse our back glass and housings for replacement panels by model, and check each product page for current prices, colours and compatibility. If you buy parts from a UK business, you have statutory rights if they are faulty; see GOV.UK's guide to consumer protection rights.

Frequently asked questions

Is it safe to use a phone with a cracked back?

For a short time, yes, if you cover the crack, use a case and keep it dry. Stop using it if the back is lifting or bulging, as the battery may be swelling.

How do I fix broken back glass on my phone?

On most Android phones, heat the back, lift it off, clean the frame and glue on a new panel. On many iPhones with bonded glass, a shop uses a laser machine or replaces the rear housing.

How do I fix broken iPhone back glass?

Check AppleCare+ first. Otherwise, depending on the model, a shop either replaces the removable back glass, lasers off bonded glass, or swaps the rear housing. Apple's repair page shows official options.

How much does it cost to fix a broken phone back?

It depends on the model, the repair method and who does it. Plastic and glued Android backs are usually cheaper; bonded iPhone glass costs more. Get quotes that state the method and warranty.

Does AppleCare+ cover broken back glass?

AppleCare+ covers accidental damage, including back glass, for a fixed excess. Check Apple's current terms for your plan.

Can I just tape over the cracked back?

Tape is a sensible short-term fix to stop cuts and fragments, but it does not restore water resistance or prevent cracks spreading. Plan a proper repair.

Should I claim on insurance for a cracked back?

Compare the excess with the repair quote. If the excess is close to or above the cost of an independent repair, paying for the repair yourself avoids a claim on your record. Check whether your policy requires repairs at an approved centre.

Will a cracked back affect resale value?

Yes. Buyers and trade-in services usually grade a phone with cracked glass much lower. Repairing it before selling can recover more than the repair cost on newer, higher-value phones.

Summary

A cracked back glass is not an emergency, but it should not be ignored. Tape it, case it, keep it dry and stop at once if the back bulges. Then choose the right repair: a glued panel swap for most Android phones and some newer iPhones, or laser removal or a housing swap for bonded iPhones. Browse our back glass and housings and repair tools to get the job done.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store