Skip to content

Same-day dispatch before 4pm Mon–Fri · Free UK delivery over £5 · 30-day returns

LOCA UV Glue for Cracked Screens: Does It Work?

LOCA UV glue does not truly fix a cracked phone screen. LOCA (liquid optically clear adhesive) is designed to bond a new cover glass to a display panel during professional refurbishment, not to repair cracks in place. Applying it over or into a crack can make fine hairline cracks look less obvious for a while, but it does not restore the glass's strength, it rarely fixes touch problems, and it can seep under the edges, damage the display or make a later proper repair harder. For a cracked screen you rely on, the practical options are a screen protector to contain small cracks, or a screen replacement. This guide explains what LOCA is for, why DIY crack filling usually disappoints, and how everyday screen adhesives such as T7000 and B-7000 fit in.

What is LOCA UV glue?

LOCA is a clear liquid adhesive that stays liquid until it is exposed to ultraviolet light, then hardens. That process, explained in the Wikipedia article on UV curing, lets a technician position glass precisely and then cure the adhesive in seconds. Once cured, LOCA is optically clear, so the image passes through it without visible lines.

In professional screen refurbishment, LOCA (or a solid sheet adhesive called OCA) is used to:

  • Bond a new cover glass to a working display after the cracked glass has been separated and removed.
  • Fill the space between glass and display so there is no air gap or reflection.

That process needs separation equipment, a clean environment, alignment moulds, UV curing lamps and often a de-bubbling chamber. It is very different from dripping glue onto a cracked phone.

LOCA vs OCA

LOCA (liquid) OCA (sheet)
Form Liquid, cured with UV light Pre-cut dry adhesive film
Strengths Fills uneven gaps; forgiving of small surface irregularities Clean, even thickness; no liquid to seep
Weaknesses Can overflow into edges; needs careful curing Needs a lamination machine and de-bubbling to avoid air pockets
Typical use Glass-only refurbishment, curved screens, some smartwatch screens Glass-only refurbishment on flat screens in volume

How professional glass-only refurbishment works

For expensive displays where only the cover glass is cracked, some workshops replace just the glass. In outline:

  1. The screen is removed from the phone and the display is tested to confirm it works.
  2. The cracked glass is separated from the display, typically with a heated separator plate and a fine cutting wire.
  3. All old adhesive is removed from the display surface without scratching the polariser.
  4. New glass is bonded with OCA in a lamination machine, or with LOCA in an alignment mould.
  5. The assembly is cured and placed in a pressure chamber to remove bubbles.
  6. The refurbished screen is tested and refitted.

Done well, this saves the cost of a new display panel. It relies on equipment, clean conditions and experience, which is why it is a workshop service. If you run a repair shop and are considering it, our repair shop owner resource hub covers equipment choices.

Does LOCA fix a cracked screen?

Claim Reality
It makes cracks disappear It can make fine hairline cracks less visible by filling air in the crack, but the result is often patchy and the crack usually remains visible at an angle
It restores strength No. The glass is still cracked and can spread or chip
It fixes touch problems Rarely. If the touch layer is damaged, glue on the surface does not repair it
It is safe on any phone Risky. Liquid can run under edges into speakers, sensors, ports or between layers
It is a permanent fix No. It is at best a cosmetic, temporary measure

We have not run our own trials of LOCA crack filling, so these points summarise how the adhesive works and what repairers commonly report rather than measured results.

The risks of DIY crack filling

  • Seepage: liquid adhesive flows into the gap between the glass and the frame, and can reach the earpiece, sensors, front camera or the display layers.
  • Hazy patches: uneven curing or trapped air bubbles leave cloudy spots that are harder to look through than the crack itself.
  • Damage to a later repair: cured adhesive on the frame or display edge makes a proper screen replacement messier and can complicate refurbishment of the display.
  • UV exposure: UV lamps should not be shone in your eyes or on skin for long. Follow the lamp and adhesive instructions.
  • Chemical handling: uncured adhesives can irritate skin and eyes. Use gloves and ventilation, and read the safety data. The HSE's COSHH guidance explains how workplaces should handle hazardous substances, which is a useful standard for a home bench too.
  • Glass splinters: pressing on cracked glass can drive splinters into fingers. A screen protector is safer.

Do not substitute superglue. Cyanoacrylate adhesives can fog glass with a white bloom as they cure and are difficult to remove.

When LOCA crack filling might be tried

If you accept the risks, the only situation where crack filling is sometimes attempted is a single fine hairline crack away from the edges, on a phone where touch and display work normally and you plan to replace the screen later anyway. Even then, a tempered glass screen protector usually achieves the same goal (holding the glass together and protecting your fingers) with less risk and no liquids.

Better options for a cracked screen

Situation Recommended option
Small crack, display and touch fine Tempered glass screen protector to contain it; plan a replacement
Cracks spreading or glass chipping Screen replacement
Lines, black patches or dead touch Screen replacement (the display or touch layer is damaged)
Valuable laminated or OLED screen with only glass cracked Professional glass-only refurbishment using OCA or LOCA in a workshop
Older phone of low value Compare the cost of a screen with the phone's value

Replacement screens for many models are in our iPhone screen replacement and Google Pixel screen collections. For typical costs by brand, see our phone screen replacement cost hub, and for help choosing a display type, read our guide to LCD displays for phones.

T7000 and B-7000: the glues repairers actually use

Many people searching for screen glue really need a bonding adhesive to fix a new screen, frame or back cover in place, not an optical filler. That is where T7000 and B-7000 come in.

T7000 B-7000
Colour Black Clear
Typical use Bonding screens, digitisers and frames where a black finish blends with the bezel Bonding where a clear finish is needed, such as clear parts, jewellery, crafts and some frames
Cure Air cure over time Air cure over time
Optical use No (black, not see-through) Not designed as an optical layer over a display

Neither is a substitute for LOCA in front of a display: they are applied as a thin bead around the edge of a part, not across the screen.

Our T7000 adhesive

Our 50mL T7000 LCD Screen Black Glue is a multi-purpose black adhesive for bonding phone and tablet screens, digitisers, frames and back covers. According to the product listing, it suits glass, plastic and metal, stays flexible to cope with small movements, and has a precision nozzle for thin, even beads. It is listed at £3.49 (price checked on 15 October 2026; check the product page for the current price) and is dispatched the same day on orders before 4pm Monday to Friday. We also stock a clear 50mL B-7000 adhesive; see the product page for its price. Both are in our repair tools and adhesive collection.

50mL T7000 LCD Screen Black Glue Multifunction Universal DIY Adhesive GlueBuy now – £3.49

How to use T7000 when fitting a new screen

  1. Clean both surfaces: remove all old adhesive from the frame and wipe with isopropyl alcohol.
  2. Dry fit first: connect and test the new screen before applying any glue.
  3. Apply a thin, even bead around the frame edge, away from speaker grilles, sensors and camera openings.
  4. Do not overdo it: too much glue squeezes out onto the display or into the phone.
  5. Press the screen into place and wipe away any squeeze-out immediately.
  6. Clamp lightly with screen clamps, rubber bands or tape while it cures, following the adhesive's curing instructions.
  7. Allow full cure before heavy use, and keep the phone away from water.

Liquid adhesives do not recreate a factory water seal. Our article on phone water resistance after repair explains what to expect.

How to use UV LOCA glue on a cracked screen (if you still want to try)

If you decide to attempt a cosmetic fill on a single hairline crack, accept that it may not work and may make a later repair harder. The general approach is:

  1. Clean the screen thoroughly and dry it completely.
  2. Mask the edges of the screen and all openings with tape so liquid cannot run under the frame.
  3. Apply a tiny amount of LOCA directly along the crack, not across the screen.
  4. Let it settle into the crack for a few minutes.
  5. Wipe away surface excess carefully with a lint-free cloth.
  6. Cure with a UV lamp following the adhesive's instructions, protecting your eyes and skin.
  7. Clean residue and fit a screen protector over the top.

If the phone is valuable or the crack is near an edge, skip this and have the screen professionally replaced or refurbished.

Common mistakes

  • Expecting LOCA to make cracked glass whole.
  • Using too much liquid, which runs into the phone.
  • Using superglue, which fogs and is hard to remove.
  • Curing in weak light, which leaves soft, tacky adhesive that attracts dust.
  • Using T7000 or B-7000 as an optical filler over the display.
  • Applying glue before testing a new screen.
  • Ignoring safety: no gloves, no ventilation, UV in the eyes.

Frequently asked questions

How do I use UV LOCA glue on a cracked screen?

Mask the edges, apply a tiny amount along a single fine crack, let it settle, wipe away excess, cure with UV light and fit a screen protector. Expect a cosmetic improvement at best, not a repair.

Is LOCA glue good for phone screens?

Yes, for its intended purpose: bonding new glass to a display during professional refurbishment. It is not a reliable crack repair.

What is B-7000 glue used for?

Clear bonding of small parts, including some phone frames, jewellery and crafts. It is applied as a bead, not as a layer over the display.

What is T7000 glue used for?

Black bonding adhesive for fitting phone and tablet screens, digitisers, frames and back covers, where a black finish blends with the bezel.

Is T7000 better than B-7000?

They do similar jobs. Choose black T7000 where it will show against black bezels, and clear B-7000 where a clear finish is needed.

Can a cracked screen be fixed without replacing it?

Not properly. A protector can contain small cracks; professional glass-only refurbishment can replace the glass while keeping the display; otherwise, replace the screen.

Can I use LOCA on a cracked smartwatch or tablet screen?

The same limits apply. On small smartwatch screens, a fine crack sometimes looks better after filling, but the glass is still weak and liquid can reach the sensors. On tablets, the large surface makes even, bubble-free curing difficult. Replacement or professional refurbishment remains the reliable fix.

How do I remove cured LOCA from a screen?

Cured LOCA is hard to remove without damaging coatings. Workshops use controlled heat and plastic tools. At home, stop if it does not lift easily, and seek professional help.

The bottom line

LOCA UV glue is a professional bonding material, not a crack repair. It may make a single hairline crack less noticeable, but it does not restore strength or touch, and it can complicate a later repair. For a cracked screen, use a protector as a stopgap and plan a replacement. When you fit the new screen, a bonding adhesive such as T7000 holds it securely in the frame. Pick up a tube below and keep it on your bench for your next screen job.

50mL T7000 LCD Screen Black Glue Multifunction Universal DIY Adhesive GlueBuy now – £3.49
Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store