Skip to content

Same-day dispatch before 4pm Mon–Fri · Free UK delivery over £5 · 30-day returns

JK vs FX5 vs EK Pro In-Cell Screens: Brand Comparison

JK, FX5 and EK Pro are brand names used in the phone repair trade for aftermarket replacement screens, most often in-cell LCD screens made to replace OLED displays on iPhones. An in-cell screen uses LCD technology with the touch sensor built into the display layer, so it costs less than an OLED replacement, but it is usually thicker, less bright in contrast and uses more battery than the phone's factory OLED. Quality and specifications vary between brands, product generations and batches, and we have not run our own side-by-side tests of these three brands, so we do not rank them. Instead, this guide explains what the terms mean and how a repair shop can compare any in-cell brand using a simple, repeatable test, so you choose based on evidence from your own bench.

What is an in-cell screen?

Phone touchscreens combine a display and a touch sensor. In older designs, the touch sensor was a separate layer on top of the display. In an in-cell design, the touch sensor is built into the display cells themselves, which makes the screen thinner and simpler than a separate-layer design. The touchscreen overview explains the different touch technologies.

In the repair trade, "in-cell" usually refers to an aftermarket LCD replacement for a phone that came with an OLED screen, such as many iPhone X and later models. It is the budget option: cheaper than an OLED replacement, but with trade-offs.

In-cell vs soft OLED vs hard OLED

Type Technology Typical strengths Typical trade-offs
In-cell LCD LCD with built-in touch, backlit Lowest cost; widely available Thicker; lower contrast (no true blacks); higher power use; colour and brightness vary by brand
Hard OLED OLED on a rigid substrate True blacks and OLED colour at a mid price Rigid panel can be thicker or fit less precisely than the factory screen
Soft OLED OLED on a flexible substrate, closer to factory construction Closest look and fit to the factory OLED Higher price than in-cell or hard OLED

OLED pixels produce their own light, so black pixels are switched off; LCD screens use a backlight that is always on behind the panel. That is why OLED screens show deeper blacks and usually use less power on dark content. The AMOLED and LCD overviews explain the technologies. Searches for "JK soft OLED" or "incell OLED" usually mean a brand's OLED line versus its in-cell line; check which technology a listing actually describes.

COF vs COG: what the terms mean

You will often see "COF" and "COG" on in-cell listings. They describe where the display's driver chip sits:

  • COF (chip on flex/film): the driver chip is mounted on the flexible cable. This allows a narrower bottom border, so the screen can look closer to the factory design, with a slimmer "chin".
  • COG (chip on glass): the driver chip is mounted on the glass panel itself. This usually needs a wider bottom border, so a COG screen may show a slightly thicker black edge at the bottom.

COF in-cell screens are generally the more expensive in-cell option. Whether the difference matters depends on your customers: some notice a wider bottom border immediately, others do not.

JK, FX5 and EK Pro: what we can and cannot say

These are trade brand names for aftermarket screens. What we can say with confidence:

  • They are aftermarket parts, not Apple parts, and Apple's iPhone Parts and Service History feature can show a message that the display is not an Apple part.
  • Each brand may offer several product lines (for example in-cell and OLED), and specifications can change between generations and batches.
  • Suppliers sometimes describe the same brand differently, so the label alone is not proof of a specification.

What we cannot do is tell you one brand is better than another, because we have not tested them side by side under controlled conditions, and supplier claims are not independent evidence. Online opinions from other repairers can be useful, but they often refer to different models, batches or suppliers. The most reliable answer comes from testing the screens you actually receive.

How to compare in-cell brands on your own bench

A simple, repeatable comparison takes an afternoon and saves months of complaints.

  1. Pick one popular model you repair often, for example an iPhone you see every week.
  2. Order the same quantity of each brand's in-cell screen for that model from your usual suppliers.
  3. Test each screen on the same phone before fitting, side by side with a known-good factory screen if you have one.
  4. Score each screen on the criteria below, using the same brightness setting and test images.
  5. Fit some to customer phones and track returns over the following weeks.
  6. Record everything in a simple spreadsheet: brand, supplier, batch date, scores, faults.

What to score

  • Fit: does it sit flush in the frame? Is the bottom border width acceptable?
  • Thickness: does the phone close normally, with no gap at the edges?
  • Brightness: compare at maximum brightness outdoors or under a strong light.
  • Colour and white balance: look at a white page and a photo with skin tones; note blue or yellow tints.
  • Viewing angles: tilt the phone and look for colour shift or dimming.
  • Touch: draw lines across the whole screen in a drawing app; look for gaps, jitter or ghost touches, especially at the edges.
  • Features: check Face ID, proximity sensor, auto-brightness and True Tone (with a programmer) on the models that use them.
  • Battery drain: compare screen-on battery use over a fixed test, since in-cell LCDs generally use more power than OLED.
  • Early failures: track any screens returned within the first weeks.

Choosing which screens to offer customers

Many repair shops offer two or three options per model, for example an in-cell screen as the budget choice and an OLED screen as the premium choice. To make this work:

  • Describe each option in plain language: technology, how it looks, battery impact and warranty.
  • Show customers the difference using a demo phone or photos.
  • Price each option to cover the part, labour and expected returns.
  • Be clear that aftermarket screens may trigger a parts message in iOS settings.

Our article on LCD displays for phones explains LCD options in more detail, and our guide to phone screen fixers covers what customers look for in a repair service.

Fitting tips for in-cell screens

  • Test before you seal. Connect the screen and check everything before applying adhesive.
  • Transfer parts carefully: earpiece speaker, front sensors and any brackets the new screen needs. Check that sensor flex cables are not pinched.
  • Use the right adhesive. Pre-cut adhesive suits most iPhone repairs; for frames and bezels on other phones, a black structural adhesive such as T7000 is commonly used to bond the screen and frame.
  • Clamp while curing where liquid adhesive is used, and wipe off excess before it sets.
  • Program True Tone on supported iPhones by transferring data from the old screen with a programmer, where the new screen supports it.

Our T7000 black adhesive is a 50mL multipurpose glue used for bonding screens and frames on many phones (price checked 15 October 2026).

50mL T7000 LCD Screen Black Glue Multifunction Universal DIY Adhesive GlueBuy now – £3.49

In-cell screens beyond iPhone

The in-cell vs OLED choice also exists for many Android phones with OLED screens. For phones that came with an LCD from the factory, such as many budget Android models, an LCD replacement is like for like; for example, we stock LCD assemblies for Infinix models including the Infinix Hot 10i and Infinix Hot 11. Browse our iPhone screen replacement and Google Pixel screen collections for other models.

Reading supplier listings critically

Aftermarket screen listings use a lot of shorthand. Before ordering, check the listing answers these questions in plain words:

  • Which technology is it? In-cell LCD, hard OLED or soft OLED. "Premium", "top quality" or "best grade" on their own say nothing about the technology.
  • Which driver layout? COF or COG, which affects the bottom border.
  • Which phone models and model numbers? Some screens fit several phones; others look similar but differ in connectors or sensor positions.
  • What is included? Some screens come with small brackets, earpiece mesh or adhesive pre-fitted; others are bare.
  • What is the returns policy? Especially for screens that have been fitted, and how quickly faulty screens are replaced.

If a listing cannot answer these, ask the supplier before ordering. If the answers change from one order to the next, note it in your test log; consistency is as important as quality.

Budget, mid and premium: a simple way to think about it

A practical way to set up your range is to think in three tiers:

  • Budget (in-cell LCD): for older phones, phones about to be sold or handed down, and customers who want the lowest price. Explain the trade-offs clearly.
  • Mid (hard OLED): OLED colour and blacks at a lower price than soft OLED, for customers who notice the difference but do not need the closest match.
  • Premium (soft OLED): the closest look and fit to the factory screen, for newer phones and customers who keep their phone for years.

Within each tier, your bench testing decides which brand you stock. The tier decides what you tell the customer.

Common in-cell complaints and how to handle them

Complaint Likely reason What to do
"The blacks look grey" LCD backlight; expected with in-cell Explain before the repair; offer OLED
"Battery drains faster" LCD uses more power than OLED on many screens Set expectations; offer OLED
"Touch misses near the edge" Screen fit or quality Re-test, reseat or replace under warranty
"Thick bottom border" COG design Offer COF or OLED options
"Message in settings about the display" Aftermarket part detected by iOS Explain in advance; it does not stop the phone working

Large-screen phones

Larger screens make quality differences easier to see. If you repair a lot of large-screen phones, test brands on those models too. Our articles on large-screen mobile phones and foldable phone screen and hinge repair cover related repairs.

Frequently asked questions

Which is better: JK, FX5 or EK Pro?

We have not tested them side by side, so we do not rank them. Quality can vary by product line and batch; test the screens you receive using the method above.

What is an in-cell screen?

An LCD screen with the touch sensor built into the display. In repairs, it usually means a budget LCD replacement for a phone that came with OLED.

What is the difference between in-cell and OLED replacement screens?

OLED replacements show true blacks and use less power on dark content; in-cell LCDs cost less but are usually thicker, with lower contrast and higher power use.

What does COF mean on an in-cell screen?

Chip on flex: the driver chip sits on the flex cable, allowing a slimmer bottom border than COG (chip on glass).

Will an in-cell screen show a message on an iPhone?

iOS can show a parts message for aftermarket displays in Parts and Service History. The phone continues to work.

Is an in-cell screen worth it?

For older phones and price-sensitive customers, often yes, provided the trade-offs in contrast, thickness and battery use are explained before the repair. For newer phones that will be kept for years, an OLED replacement is usually the better choice.

Can I fit an in-cell screen myself?

Yes, using the same process as any screen replacement for your model. Test before sealing, transfer the front sensors carefully and use fresh adhesive.

Why does my in-cell screen look different from the old one?

Because it is an LCD rather than an OLED. Expect lighter blacks, different colour tuning and slightly different viewing angles.

Summary

Brand names are a useful starting point when you buy screens, but they are not a guarantee. Understand the technology (in-cell, hard OLED, soft OLED), check COF or COG, then test each brand on your own bench and track returns. Let your own data decide which screens you offer, and review the decision every few months as brands, batches and suppliers change.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store