Skip to content

Same-day dispatch before 4pm Mon–Fri · Free UK delivery over £5 · 30-day returns

Back Glass Laser and Separator Machines for Repair Shops

For iPhone back glass repairs, most UK repair shops use a laser back glass removal machine rather than a heated "separator" machine. On the iPhone 8 through to the iPhone 13 range, the back glass is bonded to the frame, and a laser breaks down that adhesive so the cracked glass can be lifted off without replacing the whole housing. Heated separator machines with a vacuum plate are mainly used to separate front screens, especially glass from display panels during screen refurbishing. Once the old glass is off, a replacement back glass with a "big hole" camera cut-out lets you fit new glass over the existing camera ring without removing it. At The Repair Plus, iPhone 8 Plus big-hole back glass costs from £1.99 and iPhone 8 and iPhone X back glass from £1.99 to £2.99 (prices checked 15 October 2026).

This guide explains how each machine works, what to look for when buying, how to work safely, and how to choose the right replacement glass.

Which iPhones need a laser for back glass repair?

Apple introduced glass backs with the iPhone 8 and iPhone X in 2017 to support wireless charging, as noted on the iPhone X entry on Wikipedia. From the iPhone 8 up to the iPhone 13 series, the back glass is glued directly to the frame and cannot be removed intact from inside the phone. Without a laser, the options are a full rear housing swap, which means transferring every internal part, or chipping the glass off by hand, which is slow, risky and can damage the frame or the wireless charging coil.

Apple redesigned the iPhone 14 and 14 Plus so the back glass can be removed from inside, and later models continued with repair-friendlier back designs. For those phones, a laser is not normally needed for back glass replacement. In practice, shops that see a lot of iPhone 8 to 13 models get the most value from a laser machine.

How a back glass laser machine works

A back glass laser machine uses a focused laser beam, usually from a fibre laser source similar to those used for marking and engraving, which is scanned in a pattern across the back of the phone. The beam passes through the glass and heats the adhesive layer underneath, breaking down its bond. After one or more passes, the cracked glass can be lifted off with plastic tools, leaving the frame and internal components in place. The machine's software contains profiles for each phone model, which set the scan area, power and number of passes and avoid the camera area.

The idea is related to industrial laser processing, but the settings are far gentler: the aim is to weaken adhesive without burning through to internal parts.

How a screen separator machine works

A separator machine has a heated metal plate, often with a vacuum pump that holds the screen flat. The heat softens the adhesive between layers, and the technician uses a cutting wire or blades to separate them. Separators are used for:

  • Separating cracked front glass from a working display panel during screen refurbishing.
  • Removing glued screens from frames on some phones and tablets.
  • Softening adhesive on larger panels, such as tablet screens.

Separators can soften back glass adhesive too, but the glass usually shatters, and the heat needed can affect the battery and internal parts. For back glass, a laser is the cleaner and safer choice. Large-format separators, sometimes sold in sizes such as 14-inch, are aimed at tablet and larger screen work rather than phone back glass.

What to look for in a back glass laser machine

Model profiles and software

The machine is only as useful as its profiles. Check which phone models are supported, how easily new profiles can be added, and whether the software lets you adjust power, speed and passes. Good software saves time and reduces the risk of overheating parts.

Enclosure and safety interlocks

Repair lasers are powerful enough to cause eye and skin injuries. A fully enclosed machine with a viewing window rated for the laser's wavelength and an interlock that stops the laser when the door opens is much safer than an open-frame design. The laser safety overview explains laser classes and why enclosures and correct eyewear matter.

Fume extraction

Breaking down adhesive with a laser produces fumes. A built-in or connected fume extractor with suitable filtration protects the technician. In the UK, the HSE explains how employers should control airborne contaminants with local exhaust ventilation.

Positioning and alignment

A good fixture holds the phone securely and repeatably, and a red-dot or camera alignment system shows where the laser will scan. Misalignment can damage cameras or leave patches of adhesive.

Support and spare parts

Check that the supplier offers UK support, software updates, spare lenses and filters, and clear instructions. A machine that cannot be serviced quickly loses money every day it sits idle.

Power supply and footprint

Check the machine runs on a standard UK supply and fits on your bench with room for the extractor and safe access around it.

Laser back glass repair: step-by-step overview

  1. Test the phone and record what works before the repair, including cameras, flash and wireless charging.
  2. Prepare the phone. Many technicians remove the screen and battery before lasering to protect them from heat. Remove the SIM tray.
  3. Select the profile for the exact model and align the phone in the fixture.
  4. Run the laser with the enclosure closed and extraction running.
  5. Remove the glass in pieces with plastic tools, wearing cut-resistant gloves and eye protection.
  6. Clean the frame of all adhesive and fragments, so the new glass sits flush.
  7. Fit the new glass with adhesive, aligning the camera cut-out precisely, and clamp it while the adhesive cures.
  8. Reassemble and test wireless charging, cameras, flash and microphones.

For model-specific disassembly photos, such as the iPhone 8 Plus, see the iFixit iPhone 8 Plus repair page.

Choosing replacement back glass: why "big hole" matters

After lasering, the camera ring (the metal bezel around the rear camera) usually stays attached to the frame. Replacement back glass with a "big hole" has a larger camera opening so it fits over that existing ring. That avoids removing and refitting the camera bezel, which saves time and reduces the risk of damaging it. Glass without the big hole is designed for situations where the camera ring is removed and transferred.

Points to check when ordering back glass:

  • Exact model: iPhone 8 and 8 Plus glass are different sizes, and the iPhone X is different again.
  • Colour: match the phone's factory colour so the frame and glass look right together.
  • Hole type: big hole for laser repairs where the camera ring stays in place.
  • Lens included or not: listings marked "without lens" do not include the camera lens cover; buy it separately if it is cracked.

The Repair Plus stocks back glass for several models, including iPhone 8 back glass (Space Grey, big hole) at £2.99, iPhone 8 Plus back glass (Black, big hole) at £2.99 and iPhone X back glass (White) at £1.99 (checked 15 October 2026). Browse the full back glass and housings collection.

For Apple iPhone 8 Plus Replacement Back Glass (Red) (Big Hole) Without Lens The Repair PlusBuy now – £1.99
For Apple iPhone 8 Plus Replacement Back Glass (Rose Gold) (Big Hole) Without Lens The Repair PlusBuy now – £1.99
For Apple iPhone 8 Plus Replacement Back Glass (White) (Big Hole) Without Lens The Repair PlusBuy now – £1.99

Is a laser machine worth it for your shop?

The decision comes down to volume. A laser machine is a significant investment, plus space, extraction and training. If you regularly see cracked backs on iPhone 8 to 13 models, a laser lets you offer back glass repairs in-house, faster and at a better margin than housing swaps or sending jobs out. If you see only a handful a month, outsourcing to a local shop with a laser, or offering housing swaps, may make more sense until volume grows.

A simple way to estimate: count how many back glass jobs you turned away or outsourced in the last three months, estimate the margin you would make on each in-house, and compare the yearly total with the machine's cost, extraction, consumables and the time spent on training. Do not forget the time saved compared with housing swaps, which take much longer. Back glass work also sits well alongside screen repairs; our guides on how to replace an iPhone screen yourself and iPhone screen replacement costs for every model cover the front of the phone.

Training and workflow

A laser machine changes how a repair bench works, so plan a short training period. Start with scrap or donor phones to learn each profile, how many passes a model needs and how the glass behaves when it lifts. Keep a written record of settings that work well for each model, because small differences in adhesive and glass thickness between production batches can affect results. Agree a standard routine for every job: test, record, prepare, laser, clean, fit, clamp, test again.

Workflow matters too. While one phone's adhesive is curing in a clamp, the technician can start the next phone, so a laser bench can handle several back glass jobs in a session. Keep big-hole glass for your most common models and colours in stock, along with adhesive, cut-resistant gloves, spare extractor filters and camera lens covers, so a job is never held up waiting for a small part. Tell customers clearly that water resistance cannot be guaranteed after the back has been replaced, and give a written warranty on the repair.

Common mistakes

  • Using the wrong profile for the model, which can damage cameras or leave adhesive behind.
  • Running the laser with the enclosure open or without proper eyewear.
  • Working without fume extraction.
  • Not cleaning the frame fully, so the new glass sits raised.
  • Ordering standard glass when you need a big-hole version, or the wrong model or colour.
  • Forgetting to test wireless charging after the repair.

Frequently asked questions

Can I change the back glass on my iPhone?

Yes. On iPhone 8 to 13 models, it needs a laser machine or a housing swap. On the iPhone 14 and later, the back glass is designed to be removable, which makes it simpler.

How do you remove iPhone back glass?

Repair shops use a laser to break down the adhesive, then lift the glass off with plastic tools. Chipping it off by hand is possible but risky.

What is the back glass on an iPhone?

It is the glass panel on the back of iPhone 8 and later models. It allows wireless charging and is bonded to the frame on many models.

What is the difference between a laser machine and a separator machine?

A laser breaks down back glass adhesive without heating the whole phone. A separator uses a heated plate, usually for separating front screen layers or removing glued screens.

What does "big hole" back glass mean?

It has a larger camera opening so it fits over the existing camera ring after a laser repair, avoiding removing the ring.

How do you clean iPhone back glass?

Power off, use a soft, slightly damp lint-free cloth, and avoid getting moisture in openings. Avoid abrasive cleaners, which can scratch the glass and coatings.

Can a laser damage the phone?

Yes, if the wrong profile, too much power or too many passes are used, heat can damage cameras, flex cables, the wireless charging coil or the battery. Using the correct model profile, removing the battery and screen first, and testing settings on donor phones keeps the risk low.

Next step

Decide whether your repair volume justifies a laser machine, and if it does, choose one with good model profiles, a safe enclosure and proper extraction. Stock big-hole back glass for the models you see most, starting with our back glass and housings and wider iPhone parts, and contact us if you need a model or colour you cannot find listed.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store