Honor screen repair usually means replacing the complete display assembly: on most Honor phones the glass, touch digitiser and LCD or OLED panel are bonded together, so a cracked front glass is fixed by fitting a whole new screen. For popular older and mid-range models, replacement screen assemblies at The Repair Plus cost from £18.99 to £22.99 (checked 15 October 2026), for example £18.99 for the Honor 10 Lite / 20 Lite and £20.99 for the Honor V20. A DIY repair takes one to two hours with heat, picks, a suction cup and small screwdrivers; a repair shop adds labour but saves the risk. Newer flagship models with curved OLED screens cost considerably more to repair. This guide explains how to identify your model, choose the right screen, estimate the total cost and fit it.
Step one: identify your exact Honor model
Honor sells many similar-looking phones, and screens are model-specific. A screen for the Honor 10 Lite will not fit an Honor 10, and a screen for an X6b will not fit an X7a. Find the exact model before ordering:
- Go to Settings > About phone and note the Model field, which shows a code as well as the marketing name.
- If the screen is too damaged to read, check the label on the phone's retail box or your purchase records, or connect the phone to a computer.
- Search our store using that model name or code, and check the listing's compatibility notes.
Honor's own UK support pages list device information and official service options if you need help identifying a model.
Honor screen replacement prices
These are the screen assemblies listed at The Repair Plus on 15 October 2026. Prices are for the part only; check each listing for compatibility and stock.
| Honor model | Part | Price |
|---|---|---|
| Honor 10 Lite / 20 Lite | LCD screen with digitiser, full assembly (COG) | £18.99 |
| Honor V20 | LCD screen with digitiser, full assembly (COG) | £20.99 |
| Honor 70 Lite | LCD screen with digitiser, full assembly | £21.69 |
| Honor X6b | LCD screen with digitiser, full assembly | £21.99 |
| Honor 9X | LCD screen and digitiser, full assembly | £22.59 |
| Honor X7a | LCD screen with digitiser, full assembly | £22.99 |
COG stands for "chip on glass", a common construction for LCD replacement screens where the display driver chip is mounted directly on the glass panel.
How much does it cost to fix an Honor screen?
For the models above, the part costs £18.99 to £22.99 (checked 15 October 2026). If you fit it yourself, add adhesive and any tools you do not own. A repair shop adds labour, and Honor's official service usually costs more again. Flagship models with curved OLED screens cost much more to repair.
| Route | What you pay | Trade-offs |
|---|---|---|
| DIY | Screen plus adhesive and tools | Cheapest; needs patience and care |
| Independent repair shop | Screen plus labour | Fast; ask which screen grade they fit |
| Honor official service | Honor's service price for your model | Manufacturer parts and warranty; usually highest cost |
We have not quoted shop or official service prices because they vary by model and over time. When comparing quotes, always ask which screen grade is included, because two quotes can differ simply because one uses a cheaper panel.
Screen types on Honor phones
LCD screens
Most budget and mid-range Honor phones, including the 10 Lite, 20 Lite, 9X, X6b and X7a, use LCD panels. LCD screens are cheaper to replace and the replacement assemblies above are LCD units. They produce light with a backlight, so blacks look slightly grey compared with OLED, but colours and brightness are good on a quality panel.
OLED and AMOLED screens
Many higher-end Honor phones, such as the Magic series and some numbered flagships, use OLED panels, often with curved edges. These cost substantially more to replace and are more fragile during removal. If you own a flagship with a curved screen, a professional repair is usually the safer choice. Wikipedia's article on the liquid-crystal display explains how LCDs differ from emissive displays.
OEM standard vs lower-grade screens
Replacement screens vary in quality. An OEM standard assembly is built to match the factory part's size, connector and performance. Lower-grade screens may be dimmer, have less accurate colours, or respond less well to touch. For a phone you plan to keep, it is worth choosing the better grade.
Glass, LCD or both? Diagnosing the damage
| Symptom | Likely problem | Fix |
|---|---|---|
| Cracked glass, picture and touch fine | Front glass | Screen assembly (glass is bonded) |
| Black or coloured patches, lines | LCD panel | Screen assembly |
| Touch dead in areas, ghost touches | Digitiser | Screen assembly |
| No picture, phone rings | Display or connector | Check connector; then screen |
| Screen fine but phone will not charge or turn on | Not the screen | Check battery or charging port |
Before you start
Back up photos and contacts if the phone still works, because a screen repair involves disconnecting the battery and there is always a small risk. Charge the phone to around 25% or below, which reduces the risk if the battery is accidentally damaged. Work in a clean, well-lit space with a soft cloth to rest the screen on, and keep a small dish for each group of screws. Taking photos as you go makes reassembly much easier, especially for cable routing through the frame.
Tools and materials
- Heat source: heat pad, hairdryer or heat gun on low
- Suction cup and thin plastic opening picks
- Plastic spudger and tweezers
- Phillips #00 screwdriver (most Honor models)
- SIM eject tool
- Screen adhesive (pre-cut or B-7000-type adhesive, as your model requires)
- Isopropyl alcohol and lint-free cloths
- Safety glasses
How to replace an Honor screen: general steps
The exact process varies by model, so treat this as an overview and follow a guide for your specific phone. On many Honor phones you open the back first to disconnect the battery and the display cable, then remove the screen from the front of the frame.
- Back up your data if the phone still works, and power off. Remove the SIM tray.
- Heat the back cover edges and lift it with a suction cup and picks. Take care near the fingerprint sensor on models that have one on the back, as its cable may connect to the board.
- Remove the screws holding the midframe or board cover.
- Disconnect the battery first, then the display flex cable.
- Heat the front screen edges and lift the old display from the frame with picks, working slowly around the edges. Thread the display cable through the frame as you remove it.
- Clean the frame of old adhesive and glass fragments.
- Thread the new screen's cable through the frame and connect it to the board, then reconnect the battery.
- Test before gluing: touch across the whole screen, brightness, front camera, earpiece and proximity sensor.
- Apply adhesive, seat the new screen, and clamp gently while it cures.
- Refit the midframe screws and back cover with new adhesive.
Troubleshooting after fitting a new screen
If something is wrong when you power on, do not glue anything yet. Most faults come from the display connector or a pinched cable.
- No picture: disconnect the battery, reseat the display connector firmly and evenly, reconnect and test again.
- Touch not working: check the connector is fully seated and the flex cable was not creased where it passes through the frame.
- Screen flickers or shows lines: reseat the connector. If the fault stays, the new panel may be faulty or damaged during fitting; contact the seller before gluing.
- Proximity sensor not working (screen stays on during calls): make sure no adhesive or dust covers the sensor area at the top of the screen, and that any sensor rubber was transferred.
- Front camera blurry: clean the camera window on the inside of the new glass and check for adhesive residue.
- Screen not sitting flush: a cable or old adhesive is usually under the edge. Remove, clean and refit.
Using a repair shop
If you prefer not to open the phone, a local repairer can usually fit an Honor screen the same day. Ask for an itemised quote covering the screen and labour, which screen grade they use, and what warranty covers the work. Some shops will fit a screen you have bought, which lets you control the part quality; ask beforehand because policies vary. Before handing the phone over, back up your data, remove the SIM card and any memory card, and note any existing faults so there is no confusion afterwards.
Protecting the new screen
A tempered glass screen protector and a case with a raised edge reduce the chance of cracking the new screen. Clean the display with a soft microfibre cloth rather than paper towels, which can scratch. Avoid keeping the phone in the same pocket as keys or coins, which are a common cause of fine scratches.
Common mistakes
- Ordering by marketing name only. Check the model in Settings to avoid similar-name mix-ups.
- Not disconnecting the battery before unplugging the display.
- Tearing the fingerprint cable when removing the back cover.
- Too much heat, which can damage the new panel or warp plastic parts.
- Gluing before testing.
- Using too much liquid adhesive, which can seep onto the display.
Is it worth repairing an older Honor phone?
For a screen costing around £20, often yes. Older models such as the 10 Lite or 9X still handle calls, messaging, social media and streaming well, and a repair keeps a working phone out of landfill.
Check whether your model still receives security updates before spending more than the phone is worth; for an old phone used daily for banking, a newer device may be the safer long-term choice. If the battery is also weak, it is efficient to replace it at the same time. Our articles on the Honor Magic 7 Pro battery replacement discuss when repairing beats replacing.
Find parts for your model
Browse our model collections for screens and other spares, including Honor 10 parts, Honor 10 Lite parts, Honor 20 Lite parts, Honor 9X parts and Honor 8X parts. The Honor 9X screen is listed as the Honor 9X OEM LCD screen and digitiser assembly at £22.59.
Safety and disposal
Wear eye protection when handling cracked glass, and never puncture or bend the lithium-ion battery. The charity Electrical Safety First publishes battery safety advice. Dispose of old screens as electrical waste and any damaged batteries at a battery recycling point, as GOV.UK's waste batteries guidance explains.
Frequently asked questions
How much is an Honor screen replacement?
For the models we list, screen assemblies cost £18.99 to £22.99 (checked 15 October 2026). Labour is extra if a shop fits it, and flagship OLED screens cost more.
How much does it cost to fix an Honor screen at a shop?
The part price plus the shop's labour charge. Ask for an itemised quote and which screen grade they use before agreeing.
Can I replace an Honor screen myself?
Yes, with patience and the right tools. Budget and mid-range LCD models are the most approachable; curved OLED flagships are harder.
Are Honor 10 Lite and 20 Lite screens the same?
Our listing names the assembly as fitting both the Honor 10 Lite and 20 Lite. Always check your model number against the listing before ordering.
What does COG mean on a screen listing?
COG means chip on glass: the display driver chip is mounted directly on the panel's glass, a common construction for LCD replacement screens.
How much is an Honor X9c screen replacement?
We have not listed an X9c screen in this guide. Recent X9-series phones use OLED displays, which generally cost more to replace than the LCD screens above; check current listings or ask a repairer for a quote.
Next step
Check your model in Settings, match it to the right screen and order it with adhesive. If you are not confident, buy the part and ask a local repairer to fit it. For mainstream Honor LCD models, start with the screens listed above.

