For Samsung Galaxy A17 4G SM-A175F Welding Charging Port Board

Is the charging port on your Samsung Galaxy A17 4G (SM-A175F) physically broken, torn from the board, or suffering from severe connection issues that a simple flex cable swap can't fix? This Welding Charging Port Board is the essential, board-level replacement component you need to restore reliable USB-C charging and data connectivity to your device.

This Replacement Soldered Charging Port Module is manufactured as a high-quality, compatible part specifically for the Samsung Galaxy A17 4G (Model SM-A175F). This is the small circuit board with the USB-C port pre-soldered in place, designed to be professionally desoldered from the main logic board and replaced—a definitive repair for severe physical damage.

Exact Model Compatibility

Designed exclusively for the Samsung Galaxy A17 4G (Model SM-A175F). This guarantees the correct board footprint, solder pad alignment, and USB-C port orientation for a perfect fit onto your device's specific main logic board (motherboard).

Targeted Solution for Severe Physical Damage

This part is specifically for cases where the USB-C port has been ripped from the motherboard, has broken solder joints, or is damaged beyond what a plug-in flex cable can repair. It addresses the root cause when the port's connection to the mainboard itself has failed.

Complete USB-C Port Module

This is the actual port soldered onto its dedicated daughterboard. Replacing this entire module via micro-soldering is the only permanent and reliable fix for broken solder pads, cracked PCB traces, or a port that has been completely dislodged from the phone.

Professional Micro-Soldering Required

CRITICAL WARNING: This is NOT a DIY or plug-and-play component. This repair requires expert-level micro-soldering skills and professional equipment, including a soldering station, hot air rework tool, flux, and solder. The old, damaged port board must be carefully desoldered, and this new one must be precisely aligned and soldered onto the main logic board.

For Skilled Technicians Only

This part is sold exclusively for use by qualified phone repair technicians. Attempting this repair without the proper certification, tools, and experience will almost certainly result in permanent, catastrophic damage to the Galaxy A17's motherboard, rendering the phone useless.

Confirm Your Exact Model: It is imperative to verify your device is the Galaxy A17 4G with model number SM-A175F.

Diagnosis is Key: This part should only be used after diagnosing a physically damaged or detached port board. If the port is intact but not working, a standard charging port flex cable may be the correct, simpler repair.

Package Includes
1 x Welding Charging Port Board (Pre-soldered USB-C Module) for Samsung Galaxy A17 4G SM-A175F.

Disclaimer: This is a sophisticated motherboard-level component. Successful installation depends entirely on the technician's micro-soldering expertise. We assume no liability for improper installation, misdiagnosis, or damage caused during the repair process.