Replacing a Samsung Galaxy screen that comes with the frame is one of the easier phone repairs, because you transfer your existing parts into a new framed assembly rather than separating a glued panel. Budget 45–75 minutes and a few basic tools. This guide covers the method for Galaxy A models and the mistakes that cause problems.
Why “with frame” is easier
On most Galaxy A phones (A12, A13, A15, A16, A23 and similar), the replacement screen ships already bonded into its metal frame. That removes the trickiest, riskiest step of a normal screen repair — heating and prising a glued display off the frame. Instead, you move your motherboard, battery, cameras and small parts across into the new framed screen.
Tools you’ll need
- Replacement Galaxy screen with frame (matched to your exact model)
- Precision screwdriver set (usually Phillips)
- Plastic spudger and opening picks
- Tweezers
- Heat source for the back cover (many A models have a glued rear panel)
- Replacement adhesive for the back cover
Step-by-step
- Power off the phone and remove the SIM tray.
- Warm and lift the rear glass/plastic cover to access the internals.
- Unscrew and remove the plastic mid-frame/shields.
- Disconnect the battery first, then the display, cameras, buttons and any small connectors.
- Unscrew and lift out the motherboard, battery, cameras and speaker from the old framed screen.
- Transfer each part into the new framed screen, seating every connector fully.
- Reconnect the battery last, power on and test display, touch and buttons before sealing.
- Refit the shields, apply fresh adhesive and reattach the back cover.
Mistakes to avoid
- Not disconnecting the battery first — risks shorting the board.
- Forgetting to transfer a small part (loudspeaker, buttons, cameras) into the new frame.
- Not seating a connector fully — causes no display, dead touch or a non-working camera.
- Sealing the back cover before testing.
Need the right part? Find your model in the Samsung Galaxy screen replacement guide. Most Galaxy A models use a side-mounted fingerprint sensor, so the screen swap won’t affect fingerprint unlock.
Delivery & returns
- Same working-day dispatch on orders placed before 4:00pm, Monday to Friday.
- 30-day returns if an item arrives faulty.
- UK-based customer service, 10:00am to 6:00pm.
Frequently asked questions
How long does it take to replace a Samsung screen with frame?
Allow 45–75 minutes for a first attempt. Framed assemblies are quicker than glued-panel repairs because there’s no display separation.
Is replacing a Samsung screen with frame easy?
It’s one of the easier phone repairs — you transfer parts into the new frame rather than separating glued glass. Careful, methodical work is all it takes.
Do I need to move any parts into the new screen?
Yes — transfer your motherboard, battery, cameras, buttons and speaker into the new framed screen, seating each connector fully.